Instructions

122
9.FailureMessagesinESM-9950ProcessControllers
1 - Sensor failure in analog inputs. Sensor connection is wrong or there
is no sensor connection.
3 - If parameter is and parameter is and
analog input module is plugged in Module-1 or Module-2 socket, this is
sensor failure of analog input module. Sensor connection is wrong or
there is no sensor connection.
Please refer to Section 8.1.3 for detailed information about this
parameter.
2 - If parameter in “Disp List” menu is and analog input
module is plugged in Module-1 or Module-2 socket, this is sensor
failure of analog input module. Sensor connection is wrong or there is
no sensor connection.
In“PýnP Conf”Menuif;
=;=;=;
=;=aredefined.
Adjust Þ
If analog input value is less than minimum value of operating scale
top display starts to blink.
4 - If top display blinks : If analog input value is less than minimum value
of operating scale top display starts to blink.
Please refer to Section 8.1.3 for detailed information about this
parameter.
Please refer to Section 8.2.1 for detailed information about this
parameter.
i
i
i
°C
°F
V
Remote
SV
AT
AUTO
MAN
RAMP
O1
O2
O3
SET
°C
°F
V
Remote
SV
AT
AUTO
MAN
RAMP
O1
O2
O3
SET
°C
°F
V
Remote
SV
AT
AUTO
MAN
RAMP
O1
O2
O3
SET
°C
°F
V
Remote
SV
AT
AUTO
MAN
RAMP
O1
O2
O3
SET