Instructions

108
These parameters are active if EMO-930 (
) module is plugged in Module-2 socket.
0/4...20mA Current
Output
Z
Analog output module in Module-2 socket is used for
cooling
0...20mA output or 0...10V according to Section 5.2.5 is
selected.
Z
4...20mA output or 2...10V according to Section 5.2.5 is
selected.
Z
Analog output module in Module-2 socket is used for “re-
transmission”
EMO-930
Configuration of analog output module in Module-2 socket.
FunctionselectionofanalogoutputmoduleinModule-2socket.
Analog output module in Module-2 socket is used for
heating
Defines “ (It is active if “Re-transmission” . re-transmission”function
function is selected for analog output module in Module-2 socket)
It retransmits Process value to analog output.
It retransmits difference between Process and Set value to
analog output.
It retransmits Set value to analog output.
i
Scale
0 20
mA
UPL
LOL
Re-transmission