Instructions

40
If no operation is done in programming or Set value mode for 20 seconds, device
turns to main operation screen automatically.
i
If SET2/Enter button is
pressed, next parameter
is shown.
Programming Screen
If SET2/Enter button is
pressed, next
parameter is shown.
Parameter can be
changed with increment
and decrement buttons.
Press SET1
button to exit
from
programming
mode.
Programming Screen
Press SET1 button
to exit from
programming mode.
Parameter value can be
observed by pressing
increment button.
Press
SET2/Enter
button for
saving
parameter
value.
Press SET1 button to turn to
the programming screen
without saving the parameter.
Press SET1 button to turn to
the programming screen
without saving the
parameter.
Minimum Pulling Time
for Output-1
Value of Minimum Pulling
Time for Output-1
Value of
Minimum
Pulling
Time for
Output-1
It turns to
beginning of
the
programming
mode
Hysteresis-1
Parameter
Programming Screen
Main Operation Screen
Continue to press SET2/Enter
button for accessing to the
parameters.
In programming screen,
Press SET1 button to exit
from programming mode and
turn to the main operation
screen.