Instructions

If SET2/Enter button is
pressed, next parameter
is shown.
Programming Screen
If SET2/Enter button is
pressed, next
parameter is shown.
Parameter can be
changed with increment
and decrement buttons.
Programming Screen
Parameter value can be
observed by pressing
increment button.
Press SET1 button to turn to
the programming screen
without saving the parameter.
Minimum Pulling Time
for Output-1
Value of Minimum Pulling
Time for Output-1
Value of
Minimum
Pulling
Time for
Output-1
39
Press SET1
button to exit
from
programming
mode.
Press SET1 button
to turn to the
programming
screen without
saving the
parameter.
If no operation is done in programming or Set value mode for 20 seconds, device
turns to main operation screen automatically.
i
Press
SET2/Enter
button for
saving
parameter
value.
In programming screen,
Press SET1 button to exit
from programming mode and
turn to the main operation
screen.
Main Operation Screen