Instructions

OUT
SET
PROG
SET
If Enter button is
pressed, next
parameter is shown.
OUT
SET
PROG
SET
Parameter value can be
observed by pressing
increment button.
Parameter can be
changed with increment
and decrement buttons.
OUT
SET
PROG
SET
OUT
SET
PROG
SET
OUT
SET
PROG
SET
OUT
SET
PROG
SET
Press Enter
button for
saving
parameter
value.
Press SET
button to exit
from
programming
mode.
Press SET button to
turn to the
programming screen
without saving the
parameter.
Press SET button to turn to
the programming screen
without saving the
parameter.
Programming Mode
Accessing Password
Programming Mode
Accessing Password
Value
Programming
Mode
Accessing
Password
Value
It turns to
beginning of
the
programming
mode
Hysteresis
Parameter
Press SET button to
exit from programming
section
If Enter button is
pressed, next parameter
is shown.
Programming Screen
Programming Screen
Programming Screen
If no operation is done in programming or Set value mode for 20 seconds, device
turns to main operation screen automatically.
i
32
Continue to press SET2/Enter
button for accessing to the
parameters.
Main Operation Screen
In programming screen,
Press SET1 button to exit
from programming mode and
turn to the main operation
screen.