Instructions

Parameter value can
be observed by
pressing increment
button.
If Enter button is
pressed next
parameter is shown.
Parameter can be
changed with increment
and decrement buttons.
OUT
SET
PROG
SET
OUT
SET
PROG
SET
OUT
SET
PROG
SET
OUT
SET
PROG
SET
OUT
SET
PROG
SET
Hysteresis
Parameter
Hysteresis Value
In programming screen,
Press SET button to exit from
programming mode and turn
to the main operation screen.
Hysteresis
Value
Press SET button
to turn to the
programming
screen without
saving the
parameter.
If Enter button is
pressed next
parameter is shown.
Programming Screen
Press SET
button to exit
from
programming
mode.
Press Enter
button for saving
parameter
value.
28
If no operation is done in programming or Set value mode for 20 seconds, device
turns to main operation screen automatically.
i
Main Operation Screen
Programming Screen
In programming screen,
Press SET1 button to exit
from programming mode and
turn to the main operation
screen.