Instructions

PANEL MOUNTING
4-Insert the unit in the panel
cut-out from the front side.
5- Insert the mounting clamps
to the holes that located top
and bottom sides of device
and screw up the fixing
screws until the unit
completely immobile within
the panel
4
5
1
2
3
1-Before mounting the device
in your panel, make sure that
the cut-out is of the right size.
2-Check front panel gasket
position.
3-Insert the device through the
cut-out. If the mounting clamps
are on the unit, put out them
before inserting the unit to the
panel.
2
3
1
7
ENGLISH