Instructions

°C
°F
V
OP1
OP2
OP3
SET
°C
°F
V
OP1
OP2
OP3
SET
1 - Sensor failure in analogue inputs.
Sensor connection is wrong or there is no
sensor connection.
2- If top display blinks : If analogue input
value is less than minimum value of
operating scale top display starts to
blink.
3- If top display blinks : If analogue input
value is greater than maximum value of
operating scale top display starts to
blink.
4- If technician password is different from “0” and user accesses
to the parameter by Set button without entering the technician
password and wants to change a parameter, the warning
message is shown on the display as shown on the right.
Device does not allow to do any changes without entering the
password correctly.
SET
°C
°F
V
OP1
OP2
OP3
SET
°C
°F
V
OP1
OP2
OP3
SET
°C
°F
V
OP1
OP2
OP3
ESM-XX00 Process Control Unit Error Messages
17
ENGLISH
ENGLISH