Instructions

ENGLISH
Alarm output
Sensor break alarm output
Output-3 Logic output function
Process High Alarm
HYS
ON
OFF
Alarm
Set
Alarm
Output
Process Value
Process Low Alarm
HYS
ON
OFF
Alarm
Set
Alarm
Output
Process Value
Process high alarm
Process low alarm
This parameter is active, if the Logic-3 output function is
Alarm output.
Alarm-3 On delay time (0, 9999)Second
This parameter is active, if the Logic-3 output function is
Alarm output.
Alarm-3 Type
Alarm-3 hysteresis value (0% of scale, 50% of scale)Unit
Output is active when the process value is out of the band
which is defined with minimum value of operating scale
and maximum value of operating scale
Alarm-3 Off Delay Time (0, 9998)
When the value is greater than 9998, is seen on the
screen. It means alarm latching output is selected. This
parameter is active if logic-3 output function of Alarm-3
Output is alarm output.
Second
out3 ConF: MODULE-3 parameters
Alarm Types
15