Instructions

ENGLISH
MODULE-2 alarm type. This parameter is active, if the Logic-
2 output function is Alarm output.
Process high alarm
Process low alarm
This parameter is active, if the Logic-2 output function is
Alarm output.
Alarm-2 On delay time (0, 9999)Second
This parameter is active, if the Logic-2 output function is
Alarm output.
Alarm-2 Type
Alarm-2 hysteresis value (0% of scale, 50% of scale)Unit
Alarm output
Sensor break alarm output
MODULE-2 output module Logic output function
If there is EMO-X00 (Relay Output) , EMO-X10 (SSR driver)
and EMO-X20 (Digital Output) module in MODULE-2
socket, then the following parameters is active.
i
Output is active when the process value is out of the band
which is defined with minimum value of operating scale
and maximum value of operating scale
Alarm-2 Off Delay Time (0, 9998)
When the value is greater than 9998, is seen on the
screen. It means alarm latching output is selected. This
parameter is active if logic-2 output function of Alarm-2
Output is alarm output.
Second
out2 ConF: MODULE-2 parameters
If there is EMO-X30 ( )
module in MODULE-2 socket, then the following
parameter is active.
0/4...20 mA Z Current output
i
MODULE-2 analogue output module configuration
0...20mAZ output
4...20mAZ output
Scale
0 20
mA
UPL
LOL
Re-transmission
Scale
0 20
mA
UPL
LOL
Re-transmission
4
out2 ConF: MODULE-2 parameters
14