Instructions

ENGLISH
MODULE-1 alarm type. This parameter is active, if the Logic-
1 output function is Alarm output.
Process high alarm
Process low alarm
This parameter is active, if the Logic-1 output function is
Alarm output.
Alarm-1 On delay time (0, 9999)Second
This parameter is active, if the Logic-1 output function is
Alarm output.
Alarm-1 Type
Alarm-1 hysteresis value (0% of scale, 50% of scale)Unit
Alarm output
Sensor break alarm output
MODULE-1 output module Logic output function
If there is EMO-X00 (Relay Output) , EMO-X10 (SSR driver)
and EMO-X20 (Digital Output) module in MODULE-1
socket, then the following parameters is active.
i
If there is EMO-X30 ( )
module in MODULE-1 socket, then the following
parameter is active.
0/4...20 mA Z Current output
i
MODULE-1 analogue output module configuration
0...20mAZ output
4...20mAZ output
Scale
0 20
mA
UPL
LOL
Re-transmission
Output is active when the process value is out of the band
which is defined with minimum value of operating scale
and maximum value of operating scale
Alarm-1 Off Delay Time (0, 9998)
When the value is greater than 9998, is seen on the
screen. It means alarm latching output is selected.
if logic-1 output function of Alarm-1
Output is alarm output.
Second
This
parameter is active
Scale
0 20
mA
UPL
LOL
Re-transmission
4
out1 ConF: MODULE-1 parameters
out1 ConF: MODULE-1 parameters
13