Instructions

26
4.2.3EMO-720Digital(Transistor)OutputModule
SpecificationsofEMO-720Digital(Transistor)OutputModule
Output :
Dimensions :
Maximum40mA,15-18V
14x52.5x41.4mm
Z ±10%,isolated
EMO-720 Digital (Transistor) Output Module can be plugged in Module-1 or Module-2 socket to
use functions which are defined for digital output.
Applications of EMO-720 Digital (Transistor) Output Module
It can be used with heating or cooling functions as process control output, as alarm output by
programmable different alarm functions, as logic output to transfer some datas on the device to
the system. These alternatives are explained in parameters section as logic output function.
Detailed information about functions of EMO-720 Digital (Transistor) Output
Module are given in parameters section. For using these functions EMO-720
Digital (Transistor) Output Module must be installed to Module-1 or Module-2
socket.
4.2.4EMO-7300/4...20mA CurrentOutputModuleZ
SpecificationsofEMO-7300/4...20mA CurrentOutputModuleZ
Output :
Accuracy :
Note: ,
Maximumloadimpedance :
Dimensions :
0/4...20mA currentoutput
1%
Toget0...10V 500 resistorwith0.05%tolerancemustbeconnectedinparallel
asashuntresistortomoduleoutput(PleaserefertoSection5.2.5fordetailedinformation)
600
14x52.5x41.4mm
Z
Z W
W
EMO-730 0/4...20mA Current Output Module can be plugged in Module-1 or Module-2 socket
to use functions which are defined for current output.
Applications of EMO-730 0/4...20mA Current Output Module
It can be used in heating or cooling functions as process control output.
Process value, error between process and set value or set value can be retransmitted to the
system as 0...20mA or 4...20mA output. Retransmission is explained in parameters
section.
Z Z
Z
Detailed information about functions of EMO-730 Current Output Module are
given in parameters section. For using these functions EMO-730 0/4...20mA
current Output Module must be installed to Module-1 or Module-2 socket.
Z
Z
i
i