Instructions

6.2.5 Process Output Configuration Parameters
It determines output functions of Process Outputs
It determines control algorithms of Process Outputs
Hysteresis value of Process Outputs. It can be adjusted from 0% to
50% of full scale. ( It is active if ON/OFF control is selected )
It determines operation form of hysteresis
( It is active if ON/OFF control is selected)
In ON/OFF operation, this time must be passed for the output to be
energised again. It can be adjusted from 0.0 to 100.0 seconds.
( It is active if ON/OFF control is selected)
Heating
ON/OFF control algorithm
Cooling
PID control algorithm
SV + HYS/2 and SV - HYS/2
SV and SV+HYS or SV and SV-HYS
It determines if Process Output ( SSR Driver Output ) and Alarm
Output-2 operates together or not.
Process Output (SSR Driver Output) and Alarm Output-2
operates separately.
Process Output (SSR Driver Output) and Alarm Output-2
operates together. Alarm functions of Alarm Output-2 can
not be used
57