Instructions

°C
°F
VV
PO
AO1
AO2
A
AT
PSET ASET1
ASET2
M
SET
Process Controller
ESM-7730
P
AT A/M
°C
°F
VV
PO
AO1
AO2
A
AT
PSET ASET1
ASET2
M
SET
Process Controller
ESM-7730
P
AT A/M
°C
°F
VV
PO
AO1
AO2
A
AT
PSET ASET1
ASET2
M
SET
Process Controller
ESM-7730
P
AT A/M
°C
°F
VV
PO
AO1
AO2
A
AT
PSET ASET1
ASET2
M
SET
Process Controller
ESM-7730
P
AT A/M
°C
°F
VV
PO
AO1
AO2
A
AT
PSET ASET1
ASET2
M
SET
Process Controller
ESM-7730
P
AT A/M
°C
°F
VV
PO
AO1
AO2
A
AT
PSET ASET1
ASET2
M
SET
Process Controller
ESM-7730
P
AT A/M
°C
°F
VV
PO
AO1
AO2
A
AT
PSET ASET1
ASET2
M
SET
Process Controller
ESM-7730
P
AT A/M
When the power is applied to the device all led indicators and display segments are momentarily
illuminated for testing. Software revision number of the controller is momentarily illuminated on
the bottom display.
24
“ rU” Þ Revision
Revision Number
When power is on, display of the device is like below:
c
5.2 Observation of Software Revision on the Bottom Display When Power in On
First segments of top and
bottom displays are tested
Second segments of top and
bottom displays are tested.
Third segments of top and
bottom displays are tested.
Fourth segments of top and
bottom displays are tested.
All leds are energised. On
bottom display revision
number is shown. Revision
number is “07”.
Main operation screen is
shown
If there is an unexpected situation while opening the device, power off the
device and inform a qualified personnel.