Instructions

°C
°F
VV
PO
AO1
AO2
A
AT
PSET ASET1
ASET2
M
SET
Process Controller
ESM-7730
P
AT A/M
23
LED indication of
°C:Centigrade Unit
LED indication of °F
Fahrenheit Unit
LED indication of units
other than °C and °F
Led indication of Automatic
Operation (For Process Output)
Led indication of Manual Operation
(For Process Output)
Led indication of
AT , Autotune is active,
PSET , Process set
value
ASET1 , Alarm-1 set
value
ASET2 , Alarm-2 set
value
Menu button
This button is used to
access to the all menus and
to move up to another
menu in the menu list
This button is used to
access to the process and
alarm set values and it is
used to save the program
parameters
5.1 Front Panel Definition
5. Definition of Front Panel and Accessing to the Menus
LED indication of
Process status
LED indication of
Output-1 status
LED indication of
Output-2 status
Note-1
Note-1
Note-1: If increment or decrement button is pressed for 5 seconds continuously,
increment and decrement number become 10, if increment or decrement button is
pressed for 10 seconds continuously, increment and decrement number become 100.
Display for Process
Value (PV) and
Parameters
Display for Process Set
Value (SV) and
Parameter
For details refer to
Section 6.1 (Process and
Alarm Set Parameters)
and Section 6.2.2
(Function Selection
For Top and Bottom
Display)
This button is used to
increase the parameter
value and access to
the program menus.
Also it is Automatic or
Manual Operation
Form Selection button
This button is used to
decrease the parameter
value and access to the
program menus. Also it is AT
(Auto Tune Yes/No) button.
For details on
parameter, refer to Section
6.2.1