Instructions

8. Specifications
Device Type : Temperature Controller
Housing&Mounting : 72 mm x 72 mm x 95.5 mm DIN Size 43700 plastic
Housing for panel mounting. Panel cut-out is 69 x 69 mm
Protection Class : NEMA 4X (IP65 at front, IP20 at rear)
Weight : Approximately 0.21 Kg
Environmental Ratings : Standard, indoor at an altitude of less then 2000 meters
with non-condensing humidity
o o o o
Storage/Operating Temperature : -40 C to +85 C / 0 C to +50 C
Storage/Operating Humidity : 90 % max. (Non-condensing)
Installation : Fixed installation
Over Voltage Category : II
Pollution Degree : II, office or workplace, none conductive pollution
Operating Conditions : Continuous
Supply Voltage and Power : 230 V V (±15%) 50/60 Hz. 3 VA
115 V V (±15%) 50/60 Hz. 3 VA
24 V V (±15%) 50/60 Hz. 3 VA
Temperature Inputs : NTC, PTC, TC, RTD
NTC Input Types : N
Thermocouple Input Types : J,
Thermoresistance Input Type :
Accuracy : ± 1% of full scale for thermocouple, thermoresistance
Cold Junction Compensation : Automatically ± 0.1 °C / 1 °C
Line Compensation : Maximum 10 W
Sensor Break Protection : Upscale
Sampling Cycle : 3 samples per second
Control Form : ON / OFF
Relay Outputs : 7 A@250 V Vat resistive load
(Electrical Life : 100.000 Operation (Full Load))
Outputs
Display : 14 mm Red 3 digits LED display
Led Indicators : For ESM-7710-A.BC.0.1/00.00;
SET (Green), OUT (Red), PROG (Red) 3 mm Led
For ESM-7710-A.BC.0.1/01.00;
SET1(Green),SET2(Green), OUT1 (Red),OUT2 (Red),
PROG (Red) 3 mm Led
Approvals : UL Recognized Component (File No : E 254103),
,
Type-1 Enclosure Mounting
24 V (-%15, +%10) 50/60 Hz. 3 VA
TC (10 kW @.25 °C )
PTC Input Type : PTC (1000 W @.25 °C )
Opsiyonel SSR Driver : Maximum 23 mA, Maximum 15 V Z
W
K (IEC584.1)(ITS90)
PT 100 (IEC751(ITS90)
45
CECE