User manual

7.9 Adjustment of Alarm Set Values
If standard output ( Output-3 ), Module-1 or Module-2 is configured as an alarm output, alarm set
values of these outputs are in “SEt LıSt” menu. User can access to “SEt LıSt” menu both from
operator and technician menus.
Enter
password with
increment and
decrement
buttons.
Press Enter button to confirm
password
Press Enter button for accessing
SEt LıSt menu
Process Set Value
Operation
Screen
Press Enter button to confirm the
changed value and access to the
following parameter.
Operator Password
56
Operator and technician can
change the parameter with
increment and decrement buttons
SET LIST Menu
Process and alarm set values
are in SEt LıSt menu.
When menu button is
pressed, Operator Menu
Entering screen is shown
Operator
Menu
Entering
Screen
Operator Password Entering
screen is accessed by pressing
SET button.
When screen is shown,
operator parameters can be seen by
pressing SET button without
entering operator password. But
operator can not change the
parameters. Please refer to Section
8.2.8 (Operator and Technician
Passwords)
If Operator password is not 0,
operator password entering
screen is shown
°C
°F
V
O1
O2
O3
SV
REMOTE RAMP MAN AUTO
AT
SET
°C
°F
V
O1
O2
O3
SV
REMOTE RAMP MAN AUTO
AT
SET
°C
°F
V
O1
O2
O3
SV
REMOTE RAMP MAN AUTO
AT
SET
°C
°F
V
O1
O2
O3
SV
REMOTE RAMP MAN AUTO
AT
SET
°C
°F
V
O1
O2
O3
SV
REMOTE RAMP MAN AUTO
AT
SET
°C
°F
V
O1
O2
O3
SV
REMOTE RAMP MAN AUTO
AT
SET