User manual

4.2.2 EMO-410 SSR Driver Output Module

4.2.1 EMO-400 Relay Output Module

4.2 Output Modules

Specifications of EMO-400 Relay Output Module

Output

Dimensions

Electrical Life

: 3A@250V at resistive load, Single Open(or Close) Contact

: 14x30.7x41.4mm

: 100.000 Operation (Full Load)

EMO-400 Relay output module can be plugged in Module-1 or Module-2 socket to use functions

which are defined for relay output.

Applications of EMO-400 Relay Output Module

It can be used with heating or cooling functions as process control output, as alarm output by

programmable different alarm functions, as logic output to transfer some datas on the device to

the system. These alternatives are explained in parameters section as logic output function.

Detailed information about functions of EMO-400 Relay Output Module are

given in parameters section. For using these functions EMO-400 Relay Output

Module must be installed to Module-1 or Module-2 socket.

Specifications of EMO-410 SSR Driver Module

Output :

Dimensions :

Maximum 20 mA, 15-18V

14x30.7x41.4mm

Z ±10 , isolated%

EMO-410 SSR Driver Output Module can be plugged in Module-1 or Module-2 socket to use

functions which are defined for SSR driver output.

Applications of EMO-410 SSR Driver Output Module

It can be used with heating or cooling functions as process control output, as alarm output by

programmable different alarm functions, as logic output to transfer some datas on the device to

the system.

If short output period is needed in a system, using SSR Driver output module is

recommended. ( Relay must not be used for short output periods because of limited life of their

relay contact (open/close events))

Note 1 :

Detailed information about functions of EMO-410 SSR Driver Output Module

are given in parameters section. For using these functions EMO-410 SSR

Driver Output Module must be installed to Module-1 or Module-2 socket.