Instructions

All order information of ESM-3723 Temperature+Humidity Controller are given on the table at above.
User may form appropriate device configuration from information and codes that at the table and
convert it to the ordering codes.Firstly, supply voltage then other specifications must be determined.
Please fill the order code blanks according to your needs. Please contact us, if your needs are out of the
8. Other Informations
Note-1: If input type is selected PTC or NTC (BC= 2, 3), Temperature sensor is given with the
device.For this reason, if input type is selected as PTC,sensor type (V = 0,1 or 2) or if input type is
selected as NTC, sensor type (V = 0, 3 or 4) must be declared in ordering information.
7. Specifications
16
Your Technology Partner
www.emkoelektronik.com.tr
Thank you very much for your preference to
use Emko Elektronik products, please visit our
web page to download detailed user manual.
PTC input type : PTC (1000 W @25 °C )
Termoresistance input type : PT-100 IEC751 (ITS90 )
Humidity input type : 0/2..10VZ,0/4..20mAZ or ProNem Mini PMI-P
Accuracy : ± 1 % of full scale
Sensor Break Protection : Upscale
Control Form : PID or ON / OFF
Relay Outputs : 5 A@250 V V at Resistive Load (Heating Output)
: 3 A@250 V V at Resistive Load ((Heating , (Heating
Alarm), (Humidifier ), (Humidifier Alarm ))
Optional SSR Driver Output : Maximum 30mA, Maximum 15V
Temperature Display : 8 mm Red 4 digit LED Display
Humidity Display : 8 mm Green 4 digit LED Display
o
o
LED Displays : P (Green), % (Green),C (Red), F(Red),
Humidifier Output (Red), Humidifier Alarm Output (Red)
Heating Output (Red), Heating Alarm (Red)
Internal Buzzer : 83dB
Upprovals : ,
B C D E FG HI /
/
U
V W Z/
/
0
Power Supply VoltageA
Temperature Sensor Input
B
Scale(°C/°F)
ESM-3723 (77x35 DIN Size)
4
-20°C/-4°F ; 80°C/176°F
115V ( %15) 50/60Hz - 1.5VAV ±
ProNem Mini PMI-P
PT 100, IEC751(ITS90)
1
PTC (Not-1)
2
5
230V ( %15) 50/60Hz - 1.5VAV ±
8
10 - 30 V Z 1.5W
0°C/32°F ;100°C/212°F
0°C/32°F ;100°C/212°F
NTC (Not-1)
3
0°C/32°F ;100°C/212°F
3
24V ( %15) 50/60Hz - 1.5VAV ±
0
2
24V ( %15) 50/60Hz - 1.5VAW ±
0% - 100%
0% - 100%
0% - 100%
0/2 @ 10VW Voltage Input
4
5
0/4@ 20mA Current Input
6
Humidity Sensor Input
C
Scale (%)
ProNem Mini PMI-P
0/2 @ 10VW Voltage Input
4
5
0/4@ 20mA Current Input
6
01
Relay Output ( 3A@250 V V,at Resistive Load ,1 NO )
Humidifier Output
FG
1
Relay Output ( 5 A@250 V V,at Resistive Load 1NC ,1 NO )
Heating Output
E
2
SSR Drive Output ( Maximum 30mA,Maximum 15V )
01
Relay Output ( 3A@250 V V,at Resistive Load ,1 NO )
Heating Alarm Output
HI
1
Relay Output ( 3A@250 V V,at Resistive Load ,1 NO )
Humidifier Alarm Output
U
Temp.Sensor which is given with ESM-3723
V
0
None
3
NTC-M5L20.K1.5 (NTC Probe thermoplastic moulded with
1.5m cable for cooling application)
4
NTC-M6L50.K1.5 (NTC Probe stainless steel housing with
1.5m cable for cooling application)
9
ProNem Mini PMI-P (2.5m cable for Temperature and Humidity
application)
6
Customer
1
PTC-M6L40.K1.5 (PTC Air Probe 1.5 m silicon cable)
2
PTCS-M6L30.K1.5.1/8”(PTC Liquid Probe with 1.5 m silicon cable)
A
User defined
User defined