User manual
16
3.5.1 TC (Thermocouple) Connection
3.5 Temperature Sensor Input Connection
1211
TC
Connect the wires with the polarity as shown in the
figure left.
Always use compensation wire
corresponding to the thermocouple used. If
present, the shield must be connected to a
proper ground.
i
Input resistance is greater than 10M W.
i
10
3.5.2 PTC Connection
PTC
1211
10
WHITERED
3.5.3 PT-100 and PT-1000 Connection
PT-100
i
1211
10
PT-1000
1211
10
Input resistance is greater than 10M W.
i
Input resistance is greater than 10M W.
i
Pay attention the cable colours of PTC probe while doing the PTC probe
connection.