Instructions

ENGLISH
6. Changing and Saving Temperature Set Value
6.1 Changing and Saving Defrost Time Set Value
Main Operation Screen
When SET button pressed ‘’S’’ led will
be active and temperature set value will
be displayed.
SET Value Screen
Temperature set value can
be changed with increment
and decrement buttons.
When SET button pressed
temperature set value can be saved.
‘’S’’ will be inactive and goes back to
main operation screen.
Main Operation Screen
Temperature set value parameter (Default=50) MODBUS ADDRESS:40001
Temperature set value, can be programmed between minimum temperature set value and
maximum temperature set value .
When defrost button is pressed, defrost
time set value is shown and defrost
output led starts to fast blink (5 Hz).
Press set button for saving the defrost
time set value
Defrost time set value is saved, defrost
output led stop the fast blink (5 Hz), main
operation screen is shown.
Main Operating Screen
Defrost Time Value Screen
Defrost Time Value Screen
If no operation is performed in defrost time set value changing mode and temperature set
value changing mode for 20 seconds, device turns to main operation screen automatically.
i
Change the defrost time set
value with increment and
decrement buttons.
Main Operating Screen
8
O
F
O
C
P
S
ü
ESM-3711CN
O
F
O
C
P
S
ü
ESM-3711CN
O
F
O
C
P
S
ü
ESM-3711CN
O
F
O
C
P
S
ü
ESM-3711CN
O
F
O
C
P
S
ü
ESM-3711CN
O
F
O
C
P
S
ü
ESM-3711CN
O
F
O
C
P
S
ü
ESM-3711CN
O
F
O
C
P
S
ü
ESM-3711CN