Instructions

ENGLISH
16
All order information of ESM-3711-CN Cooling Controller are given on the table at left. User may form
appropriate device configuration from information and codes that at the table and convert it to the
ordering codes. Firstly, supply voltage then other specifications must be determined. Please fill the order
code blanks according to your needs.
Please contact us, if your needs are out of the standards.
V Ş Vac,
Z Ş Vdc
Ş Vdc or Vac can be appliedW
c
10.Ordering Information
A BC D E FG HI /
/
U
V W Z/
/
0 1 0 0
1
Relay Output ( 16(8) A@250 V V at resistive load, 1 NO )
Compressor Output
E
Supply VoltageA
Input Type
BC
Scale(°C)
ESM-3711-CN
4
-50°C/-58°F ; 100°C/212°F
18
NTC (Note-1)
Temp. Sensor which is given with ESM-3711-CN
V
0
None
3
NTC-M5L20.K1.5 (NTC Sensor, thermoplastic moulded with
1.5 m cable for cooling application)
4
NTC-M6L50.K1.5 (NTC Sensor, stainless steel housing with
1.5 m cable for cooling application)
9
Customer
115V ( %15) 50/60Hz - 1.5VAV ±
Note-1:If input type is selected PTC or NTC (BC= 12, 18), Temperature sensor is given with the
device.For this reason, if input type is selected as PTC,sensor type (V = 0,1 or 2) or if input type is
selected as NTC, sensor type (V = 0,3 or 4) must be declared in ordering information.
8
10 - 30 V Z
00 00
(77x35 DIN Size)
11.Optional Accessories
3
24V ( %15) 50/60Hz - 1.5VAV ±
5
230V ( %15) 50/60Hz - 1.5VAV ±
-50°C/-58°F ; 150°C/302°F
12
PTC (Note-1)
1
2
PTC-M6L40.K1.5 (PTC Air Probe with 1.5 mt silicon cable)
PTCS-M6L30.K1.5.1/8” (PTC Liquid Probe with1.5 mt silicon cable)
Your Technology Partner
www.emkoelektronik.com.tr
Thank you very much for your preference to
use Emko Elektronik products, please visit our
web page to download detailed user manual.
RS-485 Communication Interface
1.RS-485 Module 2.PROKEY Programming Module
The device is programmed(Upload or
Download) by using the parameters.