User manual

26
6. Specifications
Device Type : Digital & Analogue Temperature Controller
Housing&Mounting : 96mm x 96mm x 100mm 1/4 DIN 43700 plastic housing
for panel mounting. Panel cut-out is 92x92mm.
Protection Class : NEMA 4X (IP65 at front, IP20 at rear).
Weight : Approximately 0.40 Kg.
Environmental Ratings : Standard, indoor at an altitude of less than 2000 meters
with none condensing humidity.
o o o o
Storage/Operating Temperature : -40 C to +85 C / 0 C to +50 C
Storage/Operating Humidity : 90 % max. (None condensing)
Installation : Fixed installation
Overvoltage Category : II
Pollution Degree : II, office or workplace, none conductive pollution
Operating Conditions : Continuous
Supply Voltage and Power : 230V V (±15%) 50/60 Hz. 4VA
115V V (±15%) 50/60 Hz. 4VA
24V V (±15%) 50/60 Hz. 4VA
Temperature Sensor Inputs : TC, RTD
Thermocouple Input Types : J, K , R , S (IEC584.1)(ITS90)
Thermoresistance Input Type : PT-100. (IEC751)(ITS90)
Accuracy : 1% of full scale for Thermocouple and Thermoresistance
Cold Junction Compensation : Automatically ± 0.1°C/1°C.
Line Compensation : Maximum 10 W .
Sensor Break Protection : Upscale
Sampling Cycle : 3 samples per second
Resolution of Set Point : ± 0.2% of full scale
Accuracy of Set Point : ±1% of full scale
Control Forms : ON / OFF , Time Proportional
Relay Output : 5A@250V V (Electrical Life : 100.000 Operation (Full
Load))
SSR Driver Output : Maximum 50mA@18V Z
Display : 8 mm Green 4 digits LED indicator
Led Indicators : PWR (Green) , OUT (Red)