User manual

ManualsBrandsEMKO ManualsElectronic Control SystemsTemperature controller J, K, R, S, Pt100 0 up to +400 °C 5 A relay, SSR (L x W x H)

0.25% of full scale is

selected

Hysteresis Value Selection

0.5% of full scale is

selected

1% of full scale is

selected

2% of full scale is

selected

Minimum and maximum value of hysteresis according to the type and scale of the device are

given below:

For PT-100 ( -100.0 to 100.0 )°C: ( 0.0 to 0.5 )°C

For PT-100 ( 0.0 to 200.0 )°C : (0.0 to 0.5)°C

For PT-100 ( 0 to 400 )°C : (0 to 1)°C

For J Type TC ( 0 to 400 )°C : (0 to 1)°C

For J Type TC ( 0 to 800 )°C : (0 to 2)°C

For K Type TC ( 0 to 1200 )°C : (0 to 3)°C

For R Type TC ( 0 to 1600 )°C : (0 to 4)°C

For S Type TC ( 0 to 1600 )°C : (0 to 4)°C

If 0.25% of full scale is selected with DIP

Switch, then hysteresis;

For PT-100 ( -100.0 to 100.0 )°C : ( 0.0 to 1.0 )°C

For PT-100 ( 0.0 to 200.0 )°C : (0.0 to 1.0)°C

For PT-100 ( 0 to 400 )°C : (0 to 2)°C

For J Type TC ( 0 to 400 )°C : (0 to 2)°C

For J Type TC ( 0 to 800 )°C : (0 to 4)°C

For K Type TC ( 0 to 1200 )°C : (0 to 6)°C

For R Type TC ( 0 to 1600 )°C : (0 to 8)°C

For S Type TC ( 0 to 1600 )°C : (0 to 8)°C

If 0.5% of full scale is selected with DIP

Switch, then hysteresis;

For PT-100 ( -100.0 to 100.0 )°C : ( 0.0 to 2.0 )°C

For PT-100 ( 0.0 to 200.0 )°C : (0.0 to 2.0)°C

For PT-100 ( 0 to 400 )°C : (0 to 4)°C

For J Type TC ( 0 to 400 )°C : (0 to 4)°C

For J Type TC ( 0 to 800 )°C : (0 to 8)°C

For K Type TC ( 0 to 1200 )°C : (0 to 12)°C

For R Type TC ( 0 to 1600 )°C : (0 to 16)°C

For S Type TC ( 0 to 1600 )°C : (0 to 16)°C

If 1% of full scale is selected with DIP

Switch, then hysteresis;

For PT-100 ( -100.0 to 100.0 )°C : ( 0.0 to 4.0 )°C

For PT-100 ( 0.0 to 200.0 )°C : (0.0 to 4.0)°C

For PT-100 ( 0 to 400 )°C : (0 to 8)°C

For J Type TC ( 0 to 400 )°C : (0 to 8)°C

For J Type TC ( 0 to 800 )°C : (0 to 16)°C

For K Type TC ( 0 to 1200 )°C : (0 to 24)°C

For R Type TC ( 0 to 1600 )°C : (0 to 32)°C

For S Type TC ( 0 to 1600 )°C : (0 to 32)°C

If 2% of full scale is selected with DIP

Switch, then hysteresis;

ONOFF

OFF