User manual

Set value can be adjusted with Set Value Adjustment Potentiometer that is on the front panel. Set

value range changes according to the type and scale of the device. Minimum and maximum

values of Set value according to the device type are given below:

4.2.1 Set Values

4.2 Operation Settings

4.2.2 ON/OFF , Time Proportional Operation Form Selection

PB%

OFF

Operation form can be adjusted with proportional band adjustment and ON/OFF Control Form

selection trimpot that is on the front panel.

Trimpot is adjusted to point out ON/OFF part for ON/OFF Control

form.

PB%

OFF

Trimpot is adjusted to point out different from ON/OFF part for

proportional operation. Proportional Band Value can be adjusted

from 0% to 30% of full scale.

Minimum and maximum value of proportional band according to the

type and scale of the device are given below:

For PT-100 ( -100.0 to 100.0 )°C

For PT-100 ( 0.0 to 200.0 )°C

For PT-100 ( 0 to 400 )°C

For J Type TC ( 0 to 400 )°C

For J Type TC ( 0 to 800 )°C

For K Type TC ( 0 to 1200 )°C

For R Type TC ( 0 to 1600 )°C

For S Type TC ( 0 to 1600 )°C

Set Values according to the Type and Scale of the Device

Proportional Band Values according to the type and scale

of the device

For PT-100 ( -100.0 to 100.0 )°C scaled device: 0.0 to 60.0°C

For PT-100 ( 0.0 to 200.0 )°C scaled device : 0.0 to 60.0°C

For PT-100 ( 0 to 400 )°C scaled device : 0 to 120°C

For J Type TC ( 0 to 400 )°C scaled device : 0 to 120°C

For J Type TC ( 0 to 800 )°C scaled device : 0 to 240°C

For K Type TC ( 0 to1200 )°C scaled device : 0 to 360°C

For R Type TC ( 0 to 1600 )°C scaled device : 0 to 480°C

For S Type TC ( 0 to 1600 )°C scaled device : 0 to 480°C