Specifications

7
Operation:-
Bulk charge (Constant Current Charge)
Primary constant current charging where approximately 80% of the charging happens. The charger delivers
maximum voltage until the terminal voltage has risen to the preset level. After a number of hours, the
charger goes on to the next phase of charging (absorption).
Absorption (Constant Voltage Charge)
Final charging to almost 100%, voltage is kept at the preset level. During this case, the current is gradually
reduced. When the preset length of time is reached and charging current drops to the preset level, the
charger automatically switches to float charge mode.
Float charge
The charging process range between 95% and 100%. The battery receives a pulse if the voltage falls. This
stage will keep the battery in a good condition if it is not being used.
Equalization
BATTERIES ARE DANGEROUS
The EMBC-8025 is design to charge 24V SLA (Sealed Lead-Acid) battery of 10A to 200A (over 4KW of DC
power). It is of UTMOST importance that you follow the instructions each time you use the charger.
** NOTE: Most of the battery would drained significantly over night
** NOTE: EMBC-8025 must be connected to the batteries with minimum voltage of 16V for normal
operation.