Datasheet

PRO T2/C

FEATURES

• Frequency range of 45-860MHz.

• The meter to use for easy Digital terrestial installations.

• For measuring DVB-T, DVB-T2 and DVB-C signals.

• Digital readout of PreBER, PostBER, C/N and MER.

• Very sensitive, easy to maximize weak and strong signals.

• Signal level reads out in dBuV, dBm, dBmV.

• Presents one channel readout with high resolution or six

channels simultaneously or the complete spectrum.

• Built in beeper (pitch tone) and maxhold function.

• Aerial power output, 0, 5 and 12V.

• Built in, rechargeable battery.

• Power supply and car-charger enclosed.

• Carrying-case enclosed.

• Small and handy design.

• Made in Sweden.

Digiair

International AB

PAGE 1
Digiair PRO T2/C FEATURES • Frequency range of 45-860MHz. • The meter to use for easy Digital terrestial installations. • For measuring DVB-T, DVB-T2 and DVB-C signals. • Digital readout of PreBER, PostBER, C/N and MER. • Very sensitive, easy to maximize weak and strong signals. • Signal level reads out in dBuV, dBm, dBmV. • Presents one channel readout with high resolution or six channels simultaneously or the complete spectrum. • Built in beeper (pitch tone) and maxhold function.
PAGE 2
Digiair PRO T2/C Emitor´s DIGIAIR PRO T2/C is developed in Sweden for exact alignment and adjustment of terrestrial antennas (DVB-T, DVB-T2 and DVB-C). Input frequency: 45-860 MHz. Input level: 30-80 dBuV. Input impedance: 75 Ohm, F-connector. Signals can be readout both analog (dBuV, dBm, dBmV) and digital (BER, C/N, MER). Short circuit protection: Automatic fuse on antennainput. DIGIAIR Pro T2/C is microprocessor controlled, making it very reliable and accurate.