manual

4 | ENGLISH
1. Release the front panel of the harddisk enclosure.
2. Pull the inner case of the enclosure outward.
3. Install the hard disk in the inner case.
4. Make sure that the SATA connection of the hard disk and the enclosure connect
well.
5. Gently mount the harddisk on to the inner case.
6. Push the inner case into the enclosure.
7. Gently mount the panel on to the enclosure. Connect the USB 2.0 or eSATA
(EM7049) cable and power supply to the enclosure. The hardware installation is
now finished.
3.2 Installing the drivers
When using Windows 2000, XP, Vista and Mac OS X no additional driver is required.
These operating systems have a built in driver that enables the harddisk enclose to
automatically be recognized when connected to the computer.