Specifications

7
Bi-amping requires and additional stereo amplifier or pair of mono amps.
You will also need some means of insuring that only the desired portion of
the frequency range reaches each amplifier. The simplest way to
accomplish this is with an external electronic crossover; however, this can
also be done by hard-wiring low-pass and high-pass filters into the inputs
of the bass/mid and treble amplifiers, respectively. For the low/mid-
frequency amp, a 10kHz low-pass filter (6 dB/octave) is required; for the
treble amp, a 10kHz. high-pass filter (also 6 dB/octave) is required. If you
wish to pursue this method, your dealer or the manufacturer of your
amplifiers should be able to help you determine the specific parts necessary.
Note that you will also need a level control on either one of the stereo
amps or on the crossover, regardless of which approach you take to bi-
amping.
Bi-Amping