EM8650 Pet immune PIR Motion Detector 2-way
| ENGLISH EM8650 - Pet immune PIR Motion Detector 1.0 Introduction ........................................................................................................... 2 2.0 Front of motion detector......................................................................................... 2 3.0 Inside the motion detector ..................................................................................... 3 3.1 Infrared sensors.........................................................................
| ENGLISH LED indicator : Flashes continuously : Motion detector is performing a self-test Flashes 1x : Motion detected Flashes 2x : Self-test completed. Motion detector is active Flash once per 3 seconds : Battery power low, exchange battery* * You will receive a text message if battery level is low. The message contains the following information (up to sensor 9) Sensor name with additionally the text ‘battery almost empty’. From sensor 10 the name will be replaced by a zone nr.
| ENGLISH Bellow you will see an overview of the meaning and how to configure the jumper settings for that type of zone. Remark : Determine before pairing with the alarm system in which group the sensor will be operational. Once the sensor is successfully paired with the system. The group cannot be changed after pairing! Remark: If the group of a sensor needs to be changed, all sensors need to be paired with the alarm system once more.
| ENGLISH 4.1 Test mode After the self-test has finished press the test button once. The motion detector will send a trigger signal (flashes 1x). 4.2 Activated If the motion sensor is triggered more than 2 times within 3 minutes the device switches automatically to power saving mode. The motion detector will activate again if it does not register motion for a time period of 3 minutes. 4.3 Pair the motion detector Enter the password and press button on the control panel. The LED will turn on.
| ENGLISH Top view Side view 6.0 Test the motion detector After you fully installed the motion detector and the self-test is completed you can test the motion detector by walking within the range of the motion detector from one side to the other side. The LED indicator of the motion detector will flash if motion is detected. Adjust the motion sensor to get the best results. And repeat the test. 7.
| ENGLISH Italy Norway Spain Sweden The Netherlands UK Hungary Hungary Hungary +39 0240042016 +47 21075033 807 080 042 +46 840 309985 0900-3646368 +44 (0)203 318 9998 1-4088902 (From Budapest) 06-1-4088902 (From the rest of Hungary) +36 1-4088902 (International) Local Costs Local Costs €0.41 Local Costs €0.45 Local Costs Local Costs Local Costs Local Costs * Rates mentioned in this table do not include cell phone charges. 9.
| ENGLISH 10.0 Warranty conditions The five-year Eminent warranty applies to all Eminent products unless mentioned otherwise before or during the moment of purchase. When having bought a secondhand Eminent product the remaining period of warranty is measured from the moment of purchase by the product’s first owner. The Eminent warranty applies to all Eminent products and parts inextricably connected to and/or mounted on the main product.
