Specifications

7 | ENGLISH
Q: What kind of LED indications does the EM6556 have?
A: The EM6556 is not included to a system, out of the box. The LED will flash on
and off at 2 second intervals.
Once the EM6556 is included to a system: the LED will be off when the EM6556
is turned off and lit when the EM6556 is turned on, by pressing on the button.
When a overload state occurs and the module is ON, the LED will flash on and
off at 0.5 second intervals. The on/off button is disabled in this state. The
overload state can be cleared by disconnecting and reconnecting the wiring.
Q: How do I include or exclude the mini switch into a different Z-wave controller
A: Inclusion:
Have your Z-wave Controller entered inclusion mode, press the On/off button of
the mini switch three times.
A: Exclusion:
Have your Z-wave Controller entered inclusion mode, press the On/off button of
the mini switch three times. Once the node has been included, the LED will go
into an interval of two seconds on and two seconds off.
A: Reset:
Press the On/Off button three times to enter inclusion mode. Within one second,
press On/Off button again until LED is off. The home ID and node ID will be
cleared and reset to factory default.
6.0 Service and support
This users manual has been carefully written by Eminent’s technical experts. If you
have problems installing or using the product, please fill out the support form at the
website www.eminent-online.com/support.
You can also contact us by phone. Below you will find a list with phone numbers for
each supported country.
Country Phone number Rate per minute*
Belgium (Dutch) 070 277 286 €0.30
Belgium (French) 070 277 286 €0.30
Denmark [phone] Local Costs
Finland [phone] Local Costs
Germany 1805 982 234 €0.14
Italy [phone] Local Costs
Norway [phone] Local Costs
Spain 807 080 042 €0.41
Sweden [phone] Local Costs
The Netherlands 0900-3646368 €0.45
UK 905 871 0013 £0.30