Wireless Network Adapter User Guide Wireless Network Adapter
Wireless Network Adapter User Guide Contents Chapter 1 Product Introduction............................................... 3 1.1 Package Contents ................................................................. 3 1.2 LED Indicator Description ...................................................... 3 1.3 Product Features ................................................................... 4 1.4 Product Usage ....................................................................... 4 1.5 Before Installation ...
Wireless Network Adapter User Guide 4.2.1 Config AP ............................................................................. 34 4.2.2 Advanced .............................................................................. 34 4.2.3 Access Control List ............................................................... 35 4.2.4 Associate List ........................................................................ 36 4.2.5 AP Mode under Windows 7 ..................................................
Wireless Network Adapter User Guide Chapter 1 Product Introduction Thank you for choosing this wireless adapter! The wireless adapter supports IEEE wireless standards, and is able to quickly process file transfer, video, multi-media and other applications that require higher bandwidth. This wireless adapter also integrates wireless configuration program, which makes it easy and quick to set up the wireless client.
Wireless Network Adapter User Guide 1.3 Product Features ¾ Supports soft AP feature ¾ Detects wireless network and adjusts transmitting rate automatically ¾ Provides two working modes: Infrastructure and Ad-Hoc ¾ Supports WEP data encryption and WPA-PSK/WPA2-PSK encryption methods ¾ Supports WPS (Wi-Fi Protected Setup) encryption to secure your wireless network ¾ Complies with Windows 7/XP/ 2000/Vista, Linux, MAC OS, etc. 1.
Wireless Network Adapter User Guide to establish wireless network quickly and frees them from the trouble of cable distribution. 1.5 Before Installation 1.Please read through the whole user guide before you install and use this product. 2.Please close or uninstall the configuration programs of other manufacturers’ before you install the configuration programs of network adapters to avoid possible UI (user interface) conflict. 3.
Wireless Network Adapter User Guide 2. On the Computer Management screen ,select“Device Manager” － “Network adapters”, and right click the network adapter you want to disable and click “Disable”. 3. Click the “Yes” button on the dialogue box to disable the network adapter.
Wireless Network Adapter User Guide 1.7 Product Maintenance Please keep the product away from water and humid environment to guarantee its normal performance Protect it against hazardous substances (such as acids, alkalis etc). Please don’t directly expose the adapter to the sunlight or excessive heat. Please contact tech support if any problems occur.
Wireless Network Adapter User Guide Chapter 2 Installation Guide This chapter will guide you through the process of installing the network adapter software package, with the included software CD. The package integrates driver and configuration software. Thus, when you are installing the driver, the configuration software will be installed automatically as well.
Wireless Network Adapter User Guide be identified after being inserted into the mainboard slot,or the adapter can not scan signals after the driver being installed, please shut down your computer and clean the adapter，and then re-install). 2.2. When The “Found New Hardware Wizard” system dialogue pops up, we recommend that you select” Cancel” and use the included Setup Wizard software CD for fast installation. 2.
Wireless Network Adapter User Guide 2.5 Two set up types are provided: one is “Install driver only” ,the other is “Install driver and EMINENT WLAN Utility”. NOTE: you may select the first method when you are accustomed to use the WINDOWS built-in wireless configuration program.However, this program doesn’t support AP mode, WPS, and the WPS button on the wireless adapter.
Wireless Network Adapter User Guide recommended. 2.6. Click “Install” to begin the driver installation. 2.7 Click “Finish” to complete the installation.
Wireless Network Adapter User Guide Chapter 3 How to use the Windows Built-in Wireless Configuration This chapter explains to users who don’t install configuration program how to use Windows Built-in Wireless Configuration to connect to the wireless network . Use of the Windows Built-in Wireless Configuration requires enabling Windows Wireless Configuration service(the default is enabled). 3.1 Wireless Network Connection under Windows XP 1.
Wireless Network Adapter User Guide 3. On the right of the screen displayed are the currently scanned wireless networks. If the one you want to connect has not been scanned, click “Refresh Network List” to update the network list. Select the wireless network you want to connect, and click “Connect” or double click this wireless network. Input the key in the key dialogue box (the key input is case-sensitive) then click “Connect”.
Wireless Network Adapter User Guide NOTE: If the wireless device you are connecting to is not encrypted, the key dialogue box will not pop up. 4.When it shows “Connected” as the picture below, then you can enjoy wireless access to Internet now. 5. You can modify wireless network key from “Change advanced settings”.
Wireless Network Adapter User Guide 6. Select “Wireless Networks”and choose the one you want to modify, and then click “Properties”. 7.Modify the key in the appearing dialogue box.
Wireless Network Adapter User Guide 3.2 Wireless Network Connection under VISTA 1. Click the Wireless Connection icon in the lower right corner of your desktop and select “Connect to a network” as shown below.
Wireless Network Adapter User Guide “Connect” or double click the wireless network to connect. Click the Refresh icon in the upper right corner to update the network list if you don’t find the specified wireless network. 3. If the wireless network that you are connecting has enabled security mode, you’ll be prompted to enter the network key .Click “Connect” after you enter the correct key.
Wireless Network Adapter User Guide 4.The following screen will appear after successfully connected to the wireless network. If you want to change the wireless network key, just right click the wireless network’s SSID and then select “Properties”. You can modify the key from the appearing dialogue box.
Wireless Network Adapter User Guide 3.3 Wireless Network Connection under Windows 7 Click the wireless connection in the lower right corner of the computer’s desktop to view the available wireless networks. Select the wireless network you wish to connect and click “Connect” or double click the wireless network to connect. If you don’t find the specified one, please click the refresh icon in the upper right corner to update the list.
Wireless Network Adapter User Guide 3. It shows “Connected” after successfully connected.
Wireless Network Adapter User Guide Chapter 4 Wireless Utility When you are installing the driver, select “Install driver and WLAN Config Tool” and the adapter driver and client utility will be installed. All functions of this adapter can be configured via utility interface (in the following text it is abbreviated as UI). Select “Start”—“All Programs” —“EMINENT Wireless”— EMINENT Wireless Utility”, or click the “EMINENT Wireless Utility” shortcut on your PC’s desktop to start the UI. 4.
Wireless Network Adapter User Guide and MiniSize. While the left column displays Turn On/Off RF, Security /No security, and Signal status. 4.1.1 Site Survey The “Site Survey” screen displays currently scanned wireless signals and you can click one to connect the signal. Select one and you may view the AP’s MAC address, wireless mode (A/B/G/N), authentication type, and encryption type, or WPS authentication and signal strength.
Wireless Network Adapter User Guide The detailed explanations about the authentication and encryption are as follows: WEP：Supports 10/26-bit Hex characters and 5/13-bit ASCII. WPA-PSK：Supports 8-63-bit ASCII and 8-64-bit Hex characters. WPA2-PSK：Supports 8-63-bit ASCII and 8-64-bit Hex characters. WPA-PSK/WPA2-PSK：Supports 8-63-bit ASCII and 8-64 -bit hex characters.
Wireless Network Adapter User Guide The Hex characters consist of numbers 0~9 and letters a-f. ASCII characters consist of any Arabic digitals/letters and characters. 4.1.2 Link Information After successfully connected to one wireless network, you can view its detailed information by clicking the “Link Information” on the main interface. “Link Status” screen displays the detailed information of the connected AP including its SSID,MAC address, authentication type, encryption type, network type and channel.
Wireless Network Adapter User Guide 4.1.3 Profile Except the above common connection type, you can also connect to the wireless network by adding a profile on the “Profile“screen.The Profile screen is used to save the wireless network parameters. When the adapter is successfully connected to a network, the profile name of this network will automatically be added here, which helps the adapter to quickly connect to the wireless network next time.
Wireless Network Adapter User Guide Add WPS Profile: WPS setting requires that the connecting wireless device support WPS function. WPS helps you to fulfill wireless encryption fast as well as secure your wireless network. For detailed setting steps, refer to appendix2. There are two network types for your option when clicking the “Add” button to add wireless adapter connection: Infrastructure and Ad-Hoc. Infrastructure is an application mode that integrates the wired and wireless LAN architectures.
Wireless Network Adapter User Guide key and click next. After a profile is successfully added, the profile name can be seen on the profile list,you can edit , import or export the profile,click “Active” to finish the connection,now you can also view the detailed connection status on the “Link Information” screen.
Wireless Network Adapter User Guide adapter can not scan the SSID, thus you need to connect by creating the corresponding profile. 2.Ad-Hoc Profile management Using the Ad-hoc mode to establish a wireless network requires that each computer should be equipped with a wireless network adapter. By connecting these wireless adapters, computers are able to share the resources.
Wireless Network Adapter User Guide c.Select “Internet Protocol(TCP/IP)”and click “Properties”. d. Please enter the IP address and subnet mask, and make sure this IP address is not used by other devices in the network.For example: if your wireless adapter’s IP address is 192.168.0.1， then set other wireless adapters’ IP addresses within the range of 192.168.0.2—192.168.0.254.Click “Ok” to save the settings.
Wireless Network Adapter User Guide 2) Create a new Ad-hoc profile Click the “Add” button and enter the network name in the SSID field to identify the wireless network, and select Ad-hoc as the network type and then select the channel. Click the “Next” button to select the authentication type and encryption type and then input the correct key and click “Next”.
Wireless Network Adapter User Guide After a profile is successfully added,the profile can be seen on the profile list ,select it and click the “Active” icon on the lower right corner. And then search for the wireless network on other clients. Double click the wireless network you have configured and you’ll be prompted for the key .After entering the key, click “Connect”.
Wireless Network Adapter User Guide When the highlighted part shows “Connected“ ,it indicates the connection is successful. 4.1.4 Advanced This section is used to set the wireless mode and country region code for the current wireless adapter. You have three options to choose from: 2.4G, 5G or 2.4G+5G. The widely used is 2.4G wireless adapter. To use the 5G mode of 802.
Wireless Network Adapter User Guide please set it here. 4.2 AP mode When you want to use the wireless adapter’s AP function, please right click the UI icon on the taskbar of your computer desktop and select “Switch to AP Mode”. In this mode, the wireless adapter acts as an AP to transmit wireless signal and create a wireless network, while allowing other wireless clients to access this network.
Wireless Network Adapter User Guide In this mode, the client utility differs from that in station mode.. When it is switched to AP mode, the wireless adapter will automatically set its IP address as 192.168.123.1, and other clients that connected to this AP will automatically obtain the IP addresses of: 192.168.123.X(X is any integer from 2 to 254).
Wireless Network Adapter User Guide wireless adapter when working in AP mode, such as No forwarding among wireless clients and TX power. No forwarding among wireless clients: This feature isolates the communications among the wireless clients that are connected to the wireless adapter in AP mode. TX power: To adjust the transmit power for the wireless adapter 4.2.
Wireless Network Adapter User Guide are included in the list to access the wireless network, other hosts whose wireless MAC addresses have not been added to the list will be prohibited by default. Reject All: To prohibit all hosts whose wireless MAC addresses are included in the list from accessing the wireless network, other hosts whose wireless MAC addresses have not been added to the list will be permitted by default.
Wireless Network Adapter User Guide 4.2.5 AP Mode under Windows 7 1. Under Windows 7, wireless adapters are allowed to work in both STA and AP modes. Here, the wireless adapter acts not only as a client, but also an AP to send wireless signal, which equals to an amplifier. Right click the UI icon on the lower right corner of the computer desktop and select “Switch to STA+AP Mode”. 2.
Wireless Network Adapter User Guide number of peers. AP mode has only one encryption method which is WPA2-AES by default and cannot be modified.
Wireless Network Adapter User Guide Appendix 1: Acronyms and Terms WLAN Wireless Local Area Network 802.11 A family of specifications developed by the IEEE for WLAN technology. 802.11a An extension to 802.11 WLAN standards that provides up to 54 Mbps transmission in the 5 GHz UNI radio band. 802.11b An extension to 802.11 WLAN standard that provides up to 11 Mbps transmission in the 2.4 GHz ISM radio band. 802.11b uses DSSS modulation. 802.11g An extension to 802.
Wireless Network Adapter User Guide Appendix 2: How to Set WPS WPS setting supports two modes :PBC and PIN. The detailed setting steps are as follows: 1.Wireless Connection in PBC Mode 1.1 Enable the router’s WPS-PBC feature. If your router provides WPS button, just press and hold it for about 1 second, then the WPS LED will be flashing for about 2 minutes, which indicates the router’s WPS feature has been enabled.
Wireless Network Adapter User Guide Start PBC: Negotiating process: A profile forms automatically after the connection is successfully established. 1.3 Using the wireless adapter’s WPS button to perform PBC connection.
Wireless Network Adapter User Guide If your wireless adapter provides a WPS button,you may use the button to perform PBC connection. a).Run the adapter’s UI and switch to STATION mode b).Two minutes after the router’s WPS-PBC is enabled,press the adapter’s WPS button to connect in PBC mode. c).You may view the PBC connection process on the UI’s PBC screen. 2. Wireless Connections in PIN Mode On the “Add WPS Profile” screen, select “PIN ” as the WPS Method.
Wireless Network Adapter User Guide for WPS mode and then input 18686791 in the PIN code field,and then click the “Save” button. When the WPS indicator of the Router starts flashing,it indicates that WPS feature is enabled. Click the next button on the Profile screen and click “Start PIN” to start the PIN code negotiation.
Wireless Network Adapter User Guide 2.2 Registrar Mode On the “Add WPS Profile” screen, select the SSID of the AP that need to negotiate in WPS mode instead of selecting”Auto”.Then select”PIN” as the WPS method and click the next button to display the folowing screen: Select “Registrar” as the config mode and enter the router’s PIN code,such as 35475088 that displays on the router’s WPS screen in section 2.1, in the PIN code field here.
Wireless Network Adapter User Guide Now you can view the SSID ,authenticaiton type,and encrytion type that need to be negotiated by the WPS in registrar mode.These values can be modified but we recommend using the default.Here we use the defaut setting and then click the next buton. You can view the negotiation key on the screen below ,but you are not recommended to modify it,just click the next buton.
Wireless Network Adapter User Guide Then click “Start PIN” on the screen below to perform WPS connection. NOTE: 1.Under the WPS connection mode, when multiple routers simultaneously enable the WPS function, it may cause connection failure. 2.If the router connect to the adapter using the WPS, only one client can be connected at one time, and so if the router need to connect to multiple clients through WPS, you should repeat the WPS operation.
Wireless Network Adapter User Guide Appendix 3: FAQ Q1:Microsoft ICS service is pending. A1: If ICS service cannot be enabled after a long time, please re-switch from Station Mode to AP Mode ,if not successful ,please restart the computer. Q2: ICS is already bound by another network device. A2: Microsoft ICS service can only combine one group of WAN and LAN. This message indicates ICS may have been enabled by other network adapters. Please manually cancel ICS and re-switch to AP mode.
Wireless Network Adapter User Guide by other network adapters. 1.Please manually cancel or restart and cancel ICS, then re-switch to AP mode. 2. This dialogue box appears because virtual wi-fi miniport adapter can only be used by one wireless network adapter at a time. Please disable any other wireless network adapters and re-switch to AP mode. Q4: Under Windows 7,when I switch from station mode to AP mode ,the screen flashes“Disabling ICS， please wait……”and immediately return to station screen.
Wireless Network Adapter User Guide configure sharing and then switch to AP. And an IP address of 192.168.0.1 will be obtained. If you still have any problem, please contact our customer service.
Wireless Network Adapter User Guide Appendix 4 :Regulatory Information Eu Declaration or Declaration of Conformity Hereby, our supplier declares that this Wireless Adapter is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
Wireless Network Adapter User Guide help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). “The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
