Specifications

4 | ENGLISH
2.2 Rear panel
Figure 1-2 shows the rear panel of the switch.
Power :
The power port is where you need to connect the power cord.
3.0 Rack-mount Installation
The switch is rack-mountable and can be installed on an 19 inch equipment rack. To
do this, first, please install the mounting brackets on the switch’s side panels(one on
each side), secure them with the included screws, and then use the screws provided
with the equipment rack to mount the switch on the 19 inch rack.
4.0 Connect Powered Device to the Switch
All ports of the switch have PoE power supply function. The maximum output power of
each port can reach up to 30W. The total maximum power is 260W. It can make PD
devices, such as internet phone, network camera, wireless access point work. The
switch provides five levels of 3.84 ~ 25.5W electric power request. You only need to
connect the switch PoE port directly to the PD port by network cable.
5.0 Switch Features and Specifications
Features:
 16 × 10/100Mbps Auto-negotiation Fast Ethernet RJ45 ports with 16 ports of
PoE function (port1-port16)
 Supports PoE power up to 30W for each PoE port
 Supports total PoE power up to 260W for all PoE ports