Specifications

4 | ENGLISH
2.2 Rear panel
Figure 1-2 shows the rear panel of the switch.
Ports :
These ports are connection points for PCs and other network devices, such as
additional switches.
Power :
The power port is where you need to connect the external power adapter.
3.0 Connect Powered Device to the Switch
Ports 2 ~5 of the switch have PoE power supply function. The maximum output power
of each port can reach up to 30W. The total maximum power is 70W.It can make PD
devices, such as internet phone, network camera, wireless access point work. The
switch provides five levels of 3.84 ~ 25.5W electric power request. You only need to
connect the switch PoE port directly to the PD port by network cable.
4.0 Switch Features and Specifications
Features:
 5 × 10/100Mbps Auto-negotiation Fast Ethernet RJ45 ports with 4 ports of PoE
function (port2-port5)
 Supports PoE power up to 30W for each PoE port
 Supports total PoE power up to 70W for all PoE ports
 Supports PoE IEEE802.3af and IEEE802.3at compliant Powered Device (PD)
 Supports IEEE802.3x flow control for Full-duplex Mode and backpressure for
Half-duplex Mode
 1K entry MAC address table of the switch with auto-learning and auto-aging
 LED indicators for monitoring power, link, activity, POE
 External power adapter supply