Install guide

61 | ENGLISH
You can click the “Wi-Fi test” button to check if the EM6250 can connect to the
wireless network for these settings. You will need to unplug the Ethernet cable to
enable the wireless connection after the “Wi-Fi test” is successful.
You can click the “Wi-Fi scan” button to scan for all the available access points
nearby. See figure for reference.
If you want to define a fixed IP address when using a Wi-Fi connection, please click
the “IP address” button and enter your preferred IP address.
After the settings are updated click “Save & Apply”, The device does not need to
reboot to let the Wi-Fi work, To enable the Wi-Fi, unplug the Ethernet cable.