Install guide

ENGLISH

9. Select the wireless network you want to connect to (if not displayed press

“refresh”)

10. Enter the wireless encryption key and press “ok”

11. Disconnect the Ethernet cable to connect to the wireless network.

2.8 Mounting the camera on the wall or ceiling

1. Once the camera is connected correctly with your computer, you can mount the

camera on a wall or ceiling.

2. Use the mounting stand to mark the holes at the location where you want to mount

the camera.

3. Drill the holes and fill the holes with the supplied plugs.

4. Mount the bracket stand to the wall or ceiling using the supplied screws. If the

bracket is still attached to the camera, you can twist of the bracket again, in order

to make mounting the screws easier.

5. Mount the camera on the bracket.

6. Connect the power supply into the wall socket and connect the power tip to the

camera.

3.0 Viewing images

You can view the images both on your computer and on your smartphone screen, as

we explain in the sections below.

Optionally, you can install the supplied software so you can find the camera directly

with your computer and make recordings with your computer.

3.1 On your smartphone/tablet (Android, iPhone, iPad)

Start the App Easy Pro View (HD)* press the camera-icon of the camera you wish to

view. The device will start connecting with the camera and will show live images of the

camera.

*Easy Pro View HD is for iPad only this App ads the possibility to view more IP-Cams

in one screen and the screen is adjusted to use in landscape mode.

3.2 On your PC (Windows) in a remote location.

After Easy Pro View software is installed, it’s very easy to add a camera item in the

“Camera List” folder of the Easy Pro View software, key in the CAM ID and Password

(from the ID/Password card). And then double click this camera item. You will then

see the Camera video immediately. No further NAT/router setting modifications are

needed. The camera can be controlled remotely as well.