Install guide

ENGLISH

2.7 Adding the camera to a wireless network

There are 3 options to connect the EM6250 to your wireless network. First option is to

use the WPS button (Modem/router needs to support the WPS option). The second

option is to use the software installed on your PC (windows). Third option is to

configure the settings by using the App.

2.7.1 Connecting to Wi-Fi using the WPS button.

1. Disconnect the Ethernet cable from the camera.

2. Press the WPS button on the camera.(1 second)

3. Press the WPS button on your modem/router.(please refer to the manual of the

modem router for information about how to start WPS synchronization)

4. The blue LED will start blinking (Camera is synchronizing the wireless encryption

settings with your modem/router). The synchronization is ready when the Blue

status LED continuously lit.

2.7.2 Connecting to Wi-Fi using the PC (windows).

1. Ensure the camera is connected to the network with a Ethernet cable.

2. Install the software on the CD-ROM

3. Start “Easy Pro View”

4. Right click on “camera ID” in the auto search list and click “web configure”

5. Login with username: (default “admin”)

Password: (default “leave blank”)

6. Click Network

7. Wi-Fi security

8. A control panel will appear for your Wi-Fi settings

9. Select enable Wi-Fi function (to activate he Wi-Fi module)

10. Now you can use 2 different ways to configure the camera to connect to the Wi-Fi

network; manually or you can use the software to AutoDetect your Wi-Fi network.

11. Click “Wi-Fi scan” to search for available wireless networks.

12. Select the Wireless network you want to connect to.

13. Enter the Encryption settings and the WPA-PSK key of the wireless network and

click “Save & Apply”.

14. Disconnect the Ethernet cable to connect to the wireless network.

2.7.3 Connecting to Wi-Fi using the App.

1. Ensure the camera is connected to the network with a Ethernet cable.

2. Start the App “Easy Pro View”.

3. Select the “Camera settings” menu by pressing the arrow next to the camera you

would like to configure.

4. (if prompted Login with username: (default “admin”)

Password: (default “leave blank”)

5. Select “Network”

6. “Wi-Fi Network”

7. Enable Wi-Fi

8. A list of available wireless networks will be displayed.