Install guide

ENGLISH

detected. There is a five seconds pre-recording (only available when SD-Card is

installed) of the triggered recording to keep the critical moment recorded.

5. SD-Card Record – for each scheduling, if this is selected, either “Continuous” or

“Motion triggered” or “PIR triggered” could be enabled. For “Continuous”, it means

that the EM6270 will do the video recording to the SD-Card during the whole

scheduled period. For “Motion triggered” and/or “PIR triggered”, it means that the

EM6270 will do the video recording to the SD-Card for 30 seconds during the

scheduled period each time when the video motion is detected and/or PIR alarm is

detected. There is a five seconds pre-recording (only available when SD-Card is

installed) of the triggered recording to keep the critical moment recorded.

6. For the scheduling period, can choose between “Every week”, “Every day” or

“Fixed time” :

A. For “Every week”, can choose week days of the week and set the time

duration of each day.

B. For “Every day”, can set the time duration of every day for the scheduling.

C. For “Fixed time”, can set the starting date/time and the end date/time of the

scheduling period.

5.6 Admin

The Admin menu allows you to configure and maintain the EM6270. Here you can set

the Date/Time, LED display status, Admin login, Upgrade the Firmware for the

EM6270 and reboot the EM6270.

5.6.1 Admin login

In this page, you can modify the web login account. With this account, you can login to

the EM6270 and do any modifications. The default account is “admin” without