Install guide

73 | ENGLISH
5.5.3 NAS settings
The EM6270 provides the recording of the video files into a standard NAS ( Network
Access Storage ) device. The EM6270 connects to the NAS device using the standard
LMX_NS/CIFS/SSN protocols that are the same as the Microsoft Windows network
neighbourhood protocols. This makes the EM6270 easily record the video files to all
the standard NAS devices in the market. Since there are a lot of different choices,
including prices and scales, users can decide by themselves which is best for their
needs. By using this function, the standard NAS device is becoming a NVR (Network
Video Recorder) device.
Note : when the EM6270 is doing NAS recording, this is counted as one video user.
(max. 20 users can be connected at the same time)
1. If the “Always Recording” is selected, the system will start to record to the NAS
storage device immediately and keep recording always. If the “Schedule
Recording” is selected, the system will do the NAS recording according to the
“scheduling” in section 5.5.5. “Disable Recording” will disable this NAS recording.
2. When doing the NAS recording, the system will check the free disk space of the
NAS device. If the free disk space is less than the specified number, the system
will do “Circular recording” (overwrite the oldest recorded files of this EM6270 in
the NAS device) or “Stop recording” as selected. If the “keep recorded video for xx
days” is selected, the system will do circular recording and over write the recorded
video files older than xx days ago.
3. The EM6270 can connect to the NAS device by using the “NAS name” or “NAS IP
address”. If the NAS device and the EM6270 are in the same local area network,
the EM6270 can automatically locate and connect to the NAS device by the “NAS