Install guide

ENGLISH

5.4.2 Video Settings

The EM6270 is designed to provide high quality video for viewing from Easy Pro View

software. In this page, you can modify some settings related to the video viewing:

1. Password (play video) – this is the password needed for viewing the video from

the Easy Pro View software (provided on ID/Password card). Together with the

CAM ID, you can view the video of the EM6270 anywhere in the world via the

Internet.

Note : If the EM6270 has been restored to factory defaults the password will change to

“ipcam”

2. Internet speed – this is the Internet bandwidth of your network environment.

Higher value will generate higher video quality. But if your Internet connection

cannot provide more bandwidth than the specified value, the video quality could

degrade. So, please key in a value that is lower than your internet bandwidth.

3. Adjust resolution & frame rate automatically – you can let the system select the

suitable video resolution and frame rate automatically for you. The selection is

based on the “Internet speed” value. This is the recommended default setting.

4. Resolution – there are five choices : 320x240, 480x360 640x400, 1024x768 and

1280x800 (1280x800 is only available for PC software). If you decide to choose

the value manually, you can choose one of the five values. But, please be noticed

that if the Internet speed is slow (low value), high resolution(1280x800) or frame

rate could cause very bad video quality.

5. Frame rate – the video frame display rate. Higher value means faster movement

and continuity in the video display.

6. Favor/Preference – choose between “Video motion”, “Image quality”, “better

quality” and “best quality”. When the real bandwidth is not enough for the selected

“Internet speed”, the system will need to degrade the video motion or image