Install guide

22 | ENGLISH
The EM6270 has the possibility to save lens positions as a patrol preset. This gives
you the possibility to cycle from 1 preset to the next preset you have set (This feature
is only available in the Windows software and the WebUI.
• Position the lens to the preset you wish to save.
• Click “ ” on the preset you wish to save
• Click “ ” to test the preset
• If you wish to add the presets to the patrol check the checkboxes of the presets.
You can also change the duration of the preset to be displayed and the travel
speed between the presets in the same menu.
• Now when you press the patrol button the Camera lens will cycle between the
presets you have set.