Install guide

13 | ENGLISH
2.6.2 Connecting to Wi-Fi using the PC (windows).
1. Ensure the camera is connected to the network with a Ethernet cable.
2. Install the software on the CD-ROM
3. Start “Easy Pro View”
4. Right click on “camera ID” in the auto search list and click “web configure”
5. Login with username: (default “admin”)
Password: (default “leave blank”)
6. Click Network
7. Wi-Fi security
8. A control panel will appear for your Wi-Fi settings
9. Select enable Wi-Fi function (to activate he Wi-Fi module)
10. Now you can use 2 different ways to configure the camera to connect to the Wi-Fi
network; manually or you can use the software to AutoDetect your Wi-Fi network.
11. Click “Wi-Fi scan” to search for available wireless networks.
12. Select the Wireless network you want to connect to.
13. Enter the Encryption settings and the WPA-PSK key of the wireless network and
click “Save & Apply”.
14. Disconnect the Ethernet cable to connect to the wireless network.
2.6.3 Connecting to Wi-Fi using the App.
1. Ensure the camera is connected to the network with a Ethernet cable.
2. Start the App “Easy Pro View”.
3. Select the “Camera settings” menu by pressing the arrow next to the camera you
would like to configure.
4. (if prompted Login with username: (default “admin”)
Password: (default “leave blank”)
5. Select “Network”
6. “Wi-Fi Network”
7. Enable Wi-Fi
8. A list of available wireless networks will be displayed.
9. Select the wireless network you want to connect to (if not displayed press
“refresh”)
10. Enter the wireless encryption key and press “ok”