Manualshelf

Install guide

ManualsBrandsEminent ManualsSecurity CamerasEasy Pro View
11121314151617181920
12
|
ENGLISH
8. Camera name: Enter a description of the camera (example: front door)
9. CamID: Enter the ID provided on the ID/Password card.
10. Password: Enter the 4 digit password provided on the ID/Password card.
11. Select “OK” to add the camera.
With the toolbar you can select how and the amount of video feeds you would like to
view on your monitor from 1 to 36 screens.
2.6 Adding the camera to a wireless network
There are 3 options to connect the EM6270 to your wireless network. First option is to
use the WPS button (Modem/router needs to support the WPS option). The second
option is to use the software installed on your PC (windows). Third option is to
configure the settings by using the App.
2.6.1 Connecting to Wi-Fi using the WPS button.
1. Disconnect the Ethernet cable from the camera.
2. Press the WPS button on the camera.(1 second)
3. Press the WPS button on your modem/router.(please refer to the manual of the
modem router for information about how to start WPS synchronization)
4. The blue LED will start blinking (Camera is synchronizing the wireless encryption
settings with your modem/router). The synchronization is ready when the Blue
status LED continuously lit.
10000000