Install guide

11 | ENGLISH
2.5 Installing the software and camera on a PC or
notebook (Windows).
Before you can view the video of the camera, you need to install the software” Easy
Pro View” from the CD-ROM.
1. Insert the CD in the CD-ROM.
2. If auto-run is enabled the Wizard should start.
3. Run the wizard to install the application Easy Pro View/Play.
4. There are 2 applications installed on the PC: Easy Pro View and Easy Pro Play
5. Open Easy Pro View. (If prompted with a screen about the firewall click always
allow).
6. If the computer and the EM6270 is connected to the same network, The CAM ID
will be displayed in the “Auto Search” list. You can double click the “Auto Search”
to search all the connected IP CAMs any time. The only thing left right now for
seeing the video is to double click the CAM ID item in the “Auto Search” list. A
window asking for password input will pop up. Please enter the password
displayed on your ID/Password card into this field and click “ok”. The video will
then be displayed on the window.
7. If the EM6270 is not in the same network as the computer you can add the
EM6270 by right clicking the mouse button on “Camera List” and select “new
Camera”.