Specification Sheet

impedance

Please consult www.eminence.com for speciﬁcations of models with alternative

impedances.

power rating

Multiple units exceed published ratings evaluated under EIA 426A speciﬁcation while

tested in a free-air, non-temperature-controlled environment. Multiple compression

drivers exceeded published ratings evaluated under EIA-426A or AES speciﬁcation

while mounted on Eminence’s H290, H290S, or H2EA horn in a non-temperature-

controlled environment.

SenSitivity

The average output across the usable frequency range when applying 1W/1m into

the nominal impedance. i.e: 2.83V/8Ω, 4V/16Ω. Eminence response curves are

measured under the following conditions: All speakers are tested at 1W/1m using

a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied

microphone (software calibrated) mounted 1m from wall/bafﬂe | 2 ft. x 2 ft. bafﬂe is

built into the wall with the speaker mounted ﬂush against a steel ring for minimum

diffraction | Yamaha P3500S ampliﬁer | 2700 cu. ft. chamber with ﬁberglass on all six

surfaces (three with custom-made wedges). Compression drivers were tested using

a 2ft x 2ft bafﬂe built into the wall with horn front mounted.

coaxialS

BETA 8CX, 10CX, and 12CX are coaxial speakers with tweeter sold separately.

Published usable frequency response contingent upon use of ASD:1001 HF Driver.

Prices, product cosmetics and speciﬁcations are subject to change without notice.

mission statement

*footnotes

Eminence is dedicated to providing the best Quality, Value and Service

to meet our customers’ needs.

From design and manufacturing to the stage or studio. Once you’ve

experienced the performance of Eminence, you’ll never accept

anything else.

eminence speaker llc

838 Mulberry Pike, Eminence, KY 40019