Instruction manual
Table Of Contents
- Introduction
- Safety Instructions
- Specifications
- Packaged Accessories
- Tool Requirements
- ProSet® 2500 Tool Dimensions
- Common Nosepieces
- Basic Tool Operation
- ProSet® 2500 Front End Service
- Mandrel Collection System (MCS) – ProSet® 2500 MCS
- Cleaning the Collector Silencer
- Tool Assembly Torque Requirements
- ProSet® 2500/2500MCS Diagram
- ProSet® 2500 Parts List
- Hydraulic Oil Charging Procedure
- Maintenance
- Safety Data
- Troubleshooting
- EC Declaration of Conformity
- Conforms to the following standards:
- Signed: ____________________________________
EC Declaration of Conformity
We, Emhart Teknologies
Tucker Fasteners Limited
Birmingham B42 1BP
United Kingdom.
Declare that:
®
ProSet 2500 / 2501
®
ProSet 2500 / 2501 MCS
Conforms to the following standards:
EN 292 part 1 and part 2 ISO prEN 15744
ISO 3744 EN 28662 - 1
ISO prEN 792 part 1 EN 12096
EN ISO 4871
Following the provisions of the Machine Directive 98/37/EEC which repl
aces Directive 89/392/EEC and its
amending Directives 91/368/EEC, 93/44/EEC and 93/68/EEC.
Signed: ____________________________________
Eymard Chitty, Vice President, R&D
Birmingham
st
1 , July 2007
Page 18 Emhart Teknologies - 50 Shelton Technology Center, Shelton CT 06484 - Tel. (203) 924-9341 - Fax (800) 225-5614