Specifications

Emhart Teknologies - 50 Shelton Technology Center, Shelton CT 06484 - Tel. [phone] - Fax [phone] Page 3
Introduction
The PNT1000L-PC is a lightweight tool for installing POP
®
brand POP NUT™ blind rivet nuts and other blind
threaded inserts by adjusting the setting force to the insert being installed rather than stroke like traditional
blind rivet nut tools. Controlling the setting force has the following benefits:
• No stroke adjustment is needed for the same nut in multiple application grips.
• Eliminated application & nut damage due to “double stroking”.
• Proper set achieved even with a small gap between the nut flange and Nosepiece.
Table 1 lists the POP NUT™ blind rivet nuts that can be fastened using this tool. The Nosepiece and Mandrel
must be changed to fit some sizes of POP NUT™. (See Table 5, Mandrel and Nosepiece Requirements table
in the Specification section)
Table 1: POP NUT™ blind rivet nut range
Material
Thread
Size
Aluminum
Steel
Steel RLT
Stainless
M6X1.0
¼-20



M8X1.25
5/16-18




M10X1.5
3/8-16


*
M12X1.75
1/2-13
*
* Need to set tool at 0.55 MPa [80 psi] Minimum.