Installation

Wire Legend:
Red Supply Voltage +9/+18/+27
Green Output of Equalizer
Black Ground
Black Ground #2 for convenience
White Input to Equalizer
SPC
EXG
0.025 LOG FREQ (kHz) 10
10 dB/div
0.025 LOG FREQ (kHz) 10
10 dB/div
FEATURES:
The EMG-SPC and EXG are active tone circuits.
As you can see from the graphs above the SPC is a
midrange boost with a slight high end roll off. The EXG
boosts the low and high frequencies while cutting the mid.
When the controls are at zero (fully counter clockwise) the
effect is bypassed. Rotate the controls clockwise to
gradually increase their effect.
The SPC is designed simulate a dual-coil tone from the
single coil SA Pickup while the EXG makes the tone bright
and full. Start with both controls at zero and go from there.
SPC
EXG