Instruction manual

1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 82/114
The information provided is: in the past two days (between 24/06 and 26/06, look at “period”), the system
calculated the average set-point “SP1” and the average temperature “Avg”. Moreover it displays the
minimum, the maximum value and the maximum value of temperature after a defrost (Tdef). Finally it
shows the percentage of cool “%Cool”. The latter is the most important value, it is calculated by using
the following math formula:
100% 


DEFROST
COOL
TT
T
Cool
COOL
T = cool time (corresponding relay open), in the selected time interval or the average %
T
= time interval selected
DEFROST
T = defrost time in the selected interval
To complete the information provided this tool show also a horizontal bar and a Legenda. If the user
moves the mouse pointer above this area, the cursor will show the temperature and the data.