Instruction manual

1592028000 XWEB300D_500_500D opr GB r2.2.0 2013.08.01.docx XWEB500/300 75/114
Layout Submenu:
 START
It allows you to test your layout. Once you push this button the editor transform itself in the viewer. You can
have an overview of the layer with real data coming from the instruments you have selected.
 STOP
This function interrupts the start function described above.
Window Submenu:
 WINDOW NAME
Let you choose among the available layers.
3.5.4.2 LAYOUT VIEW
With this function the user can use the layout previously prepared via “Layout Editor”. Beware that the
final user can interact with the real application if you used “Global command” function (see the above
point P).
Of course Java Virtual Machine is needed. Your browser helps you during the download procedure.
Quite probably the image you uploaded will not change frequently, so once they all are in the browser’s
cache next time the load time will be faster. According to this function please check if your browser
settings support cache. You can do this by clicking “Tools” menu, then “Internet Options” general TAB.
3.5.5 GLOBAL COMMANDS FUNCTION (ONLY FOR XWEB500DIN)
It allows you to place in the layer a command-button and use it to send command to a particular instrument
or to a range of them. We do not describe here again all the functions that are available also in the layout.
3.5.5.1 GLOBAL EDIT
In the homepage, go to Devices and choose “Global Edit”.
Go to insert menu and choose “Global Command”:
Here select the proper category. Once you have
made your choice, the system loads up a new
window.
A summarizing window will appear: